DS 5007S
Programmable
Buttons (7)
Dial Button
8
Soft Button
LCD Panel
Status Indicator
Scroll Button
Keyset
Support
Volume Button
Redial Button
Conference Button
Transfer Button
Hold Button
Microphone
Speaker Button
Home Page
ASSEMBLING YOUR KEYSET
•
Place the keyset face down on a flat surface.
•
Insert notched ends of the support bracket into the channels located in the
upper section of the bottom panel. Push towards the top of the keyset to lock
in.
•
Plug the handset cord into the jack marked with the
•
Route the handset cord out the RIGHT side of the keyset as you look at it face
down.
•
Plug the four-conductor line cord, from the wall, into the jack with the
symbol on the bottom of the keyset.
Table of Contents
DS 5000
symbol.
9