Samsung OfficeServ ITP-5121D User Manual page 173

SYSTEM TONES
The system provides several tones to assist you. Some of these tones are already
familiar to you.
Intercom Dial Tone—A steady tone that indicates you can begin dialing.
DIAL TONE
Ringback Tone—Indicates the station you dialed is ringing.
RINGBACK TONE—1000 ms ON/3000 ms OFF
Busy Tone—Indicates the station you dialed is busy.
BUSY TONE—500 ms ON/500 ms OFF
DND/No More Calls Tone—Fast busy tone indicates the station you dialed
is in the Do Not Disturb mode or cannot receive any more calls.
DND/NO MORE CALLS TONE—250 ms ON/250 ms OFF
Transfer/Conference Tone—Indicates your call is being held and you
can dial another party.
TRANSFER/CONF TONE—100 ms ON/100 ms OFF
Confirmation Tone—Very short beeps followed by dial tone indicate you
have correctly set or canceled a system feature.
CONFIRMATION TONE—50 ms ON/50 ms OFF
Error Tone—A distinctive two level beeping tone indicates you have done
something incorrectly.Try again.
ERROR TONE—50 ms of tone 1/50 ms of tone 2
6
CONTINUOUS
CONTINUOUS
CONTINUOUS
FOR TEN SECONDS
CONTINUOUS
FOR ONE SECOND
(programmable)
FOR THREE SECONDS
Home Page
DS 5021D
Programmable Buttons (21)
Speaker
Volume Button
Redial Button
Dial Button
Speaker Button
Hold Button
DS 5014D
Programmable Buttons (14)
Speaker
Volume Button
Redial Button
Dial Button
Speaker Button
Hold Button
DS 5000
Table of Contents
Soft Button
LCD Panel
Status Indicator
Scroll Button
Keyset
Support
Navigation Button
Microphone
Conference Button
Transfer Button
Soft Button
LCD Panel
Status Indicator
Scroll Button
Keyset
Support
Navigation
Button
Microphone
Conference Button
Transfer Button
7