Setup Menu - Samsung OfficeServ ITP-5121D User Manual

ITP-5107S SETUP
INITIALIZING THE ITP-5107S
Initially the ITP-5107S IP keyset will need to be setup to operate within the users
network.The Setup Menu is also used to make changes to the keyset, in the event
that the system information should change. The option chosen via scroll key will
be highlighted.
The station numbers will be automatically set by the OfficeServ 100, OfficeServ
500, and the OfficeServ 7000 Series systems once the necessary information has
been entered into the IP keyset. Enter ID and password of the server, as described
below to register the phone.
See your system administrator for specific Network and Server addresses. The
addresses necessary to set up the ITP-5107S are:
• IP Address of the ITP
• Network Gateway Address
• Subnet Mask
• IP Address of System's MCP
• User ID
• Password

SETUP MENU

TO GET TO THE SET-UP MENU, UNPLUG THE POWER FROM THE ITP-5107S
PHONE OR UNPLUG THE LAN CABLE IF USING POWER OVER ETHERNET,
PRESS AND HOLD THE , BUTTON ON THE DIAL PAD WHILE PLUGGING IN THE
POWER CORD OR LAN CABLE IF USING POWER OVER ETHERNET BACK INTO
THE PHONE. NOW RELEASE THE , BUTTON.
>1.SYSTEM EASY WIZARD
2.SYSTEM INFORMATION
Other items not shown on screen when scrolling down.
3.NETWORK SETUP
4.LOAD & UPGRADE SETUP
8
5.SYSTEM SERVER SETUP
6.FACTORY RESET
Home Page
6.FACTORY RESET
7.REBOOT
NAVIGATING THE MENUS
Once the IP setup menu is displayed, you can move to each menu by using the
buttons as described below:
• The [0]~[9] dial buttons are used to directly choose a menu, or sub-menu
options.
• The volume [M]~[L] buttons are used to move the cursor up or down to
scroll through menu items.
• The SPEAKER button is used to select a menu item or to save data after entry.
It functions as an "ENTER" or "OK" button.
• The HOLD button will take you out of the current sub-menu to one menu
level up to previous screen. It functions as an "ESCAPE" or "CANCEL" button.
• In some entry fields, the HOLD button is used to backspace the cursor or to
delete entered data.
• The [,] button on the dial pad is used to enter [
ITP-5107S
Table of Contents
] between IP address octets.
G
9