Specifications - Savaria Infinity Owner's Manual

1. SPECIFICATIONS

Infinity/Infinity HD Specifications
Load capacity
Rated speed
Power supply
Drive system
Cab sizes
Maximum travel
Maximum # of stops
Pit depth required
Minimum overhead
clearance
Control system
Floor selection
Flooring material
Control panel finish
Hall station finish
Motor
Cab panel finish
Lighting supply
Standard features
Part No. 000784, 10-m01-2011
Infinity: 750 lb (341 kg) or 1000 lb (454 kg)
Infinity HD: 1400 lb (635 kg)
36 ft/min (0.18 m/s) nominal
208 volt, three phase, 30 amps or
230 volt, single phase, 40 amps
1:2 cable hydraulic
Infinity Type 1L/R, 2, 3, 4 and 5:
• 36" x 48" (914 mm x 1219 mm)
• 36" x 54" (914 mm x 1372 mm)
• 36" x 60" (914 mm x 1524 mm)
• 40" x 54" (1016 mm x 1372 mm)
Infinity HD Type 1L/R, 2, 3, 4 and 5:
• 48" x 60" (1219 mm x 1524 mm)
50 ft (15.24 m) or per local code
6 stops
Infinity: 8" (203 mm) minimum
Infinity HD: 12" (305 mm) minimum
92" (2337 mm) for standard 80" cab; 96" (2438 mm) for 84" cab, 108"
(2743 mm) for 96" cab
Constant pressure or automatic push button
Magnetic selector
Plywood (standard) or hardwood (optional)
Clear or bronze anodized aluminum (standard)
Stainless steel or brass (optional)
Clear or bronze anodized aluminum (standard)
Stainless steel or brass (optional)
Infinity: 3 HP (2.24 kW)
Infinity HD: 5 HP (3.73 kW)
Solid melamine or MDF panels (standard)
Unfinished oak veneer or raised solid hardwood (optional)
115 volts, 60 Hz, 15 amps
Automatic on/off cab lighting
"Car in use" illuminated hall call buttons
Digital floor indicator in cab
Emergency battery powered lowering and lighting with automatic
recharging
Emergency stop button in cab
Emergency alarm button in cab
Solid ceiling with four stainless steel pot lights
Vertical keyed stainless steel control panel
Infinity & Infinity HD Owner's Manual
5