Engine Coolant - Sea-doo GTX 4-TEC 6159 Operator's Manual

7. Remove dipstick and read oil level. It
should be between marks.
3
F18D2MY
1. Full
2. Add
3. Operating range
8. Otherwise, add oil up to have the
level between marks as required.
9. To add oil, unscrew oil cap. Place a
funnel into the opening and add the
recommended oil to the proper level.
Do not overfill.
NOTE: Every time oil is added in en-
gine, the complete procedure ex-
plained above must be done (engine
restarted, idling for 30 seconds, 30
seconds waiting time and then, re-
checking the oil level). This is required
to allow the oil to properly transfer in
the different oil chambers and to then
level. Otherwise, you will have a false
oil level reading.
1
1
2
www.SeaDooManuals.net
F18D09Y
TYPICAL
1. Oil cap
10. Properly reinstall oil cap and dipstick.

Engine Coolant

Recommended Coolant
Always use ethylene-glycol antifreeze
containing corrosion inhibitors specifi-
cally for internal combustion aluminum
engines.
NOTE: When available, it is recom-
mended to use biodegradable anti-
freeze compatible with internal com-
bustion aluminum engines. This will
contribute to protect the environment.
Cooling system must be filled with wa-
ter and antifreeze solution (50% water,
50% antifreeze).
Bombardier sells premixed coolant with
freezing protection up to - 52°C (- 62°F)
(P/N 293 600 038).
To prevent antifreeze deterioration, al-
ways use the same brand. Never mix
different brands unless cooling system
is completely flushed and refilled. Refer
to an authorized Bombardier SEA-DOO
dealer.
1
47