Bilge Drain Plugs; Jet Pump Nozzle; Reverse Gate - Sea-doo GTX 4-TEC 6159 Operator's Manual

F18L0TY
Refer to POST-OPERATION CARE sec-
tion for proper use.

27) Bilge Drain Plugs

Should water be found in the bilge, it
can be easily drained by unscrewing
the drain plugs when engine is off and
watercraft is out of water.
CAUTION: Remove boat from water
prior to unscrewing drain plugs.
1
2
F18L14Y
TYPICAL
1. Drain plugs
2. Tighten
3. Unscrew
40
1
3
www.SeaDooManuals.net
Tilt the watercraft slightly to the rear
so that the water can completely flow
out of the bilge.
It is suggested to drain bilge on a ramp.
CAUTION: Make sure drain plugs are
properly secured prior to launching
the watercraft in water.

28) Jet Pump Nozzle

Jet pump nozzle turns side to side via
rider input at the handlebar. This pro-
vides directional control when engine
is running.
F18J05Z
1. Jet pump nozzle

29) Reverse Gate

When selecting the neutral or reverse
position with the shift lever, the re-
verse gate moves up or down to obtain
the desired position.
F18J05Y
TYPICAL
1. Reverse gate
1
1