Engine Coolant - Sea-doo GTS Series Operator's Manual

smo2011-003-010_a
TYPICAL - RXT iS ILLUSTRATED
1. Oil dipstick location
6. Reinstall dipstick, push in com-
pletely.
7. Remove dipstick again and read
oil level. It should be between the
FULL and ADD marks.
lmr2007-053-100_a
1. Full
2. Add
3. Operating range
8. Add oil to ensure the level is be-
tween marks as required.
To add oil:
– Unscrew oil cap.
– Place a funnel in the oil filler neck
opening.
– Add the recommended oil to the
proper level.
NOTE: Do not overfill.
smo2011-003-010_b
TYPICAL
1. Oil filler cap location
NOTE: Every time oil is added in the
engine, the complete procedure ex-
plained in this section must be carried
out again. Otherwise, you will obtain a
false oil level reading.
9. Properly reinstall oil cap and dip-
stick.
Engine Oil Change and Oil Filter
Replacement
The oil change and filter replacement
should be performed by an authorized
Sea-Doo dealer.

Engine Coolant

Recommended Engine Coolant
Always use ethylene-glycol antifreeze
containing corrosion inhibitors specif-
ically formulated for internal combus-
tion aluminum engines.
NOTE: When available, it is recom-
mended to use biodegradable an-
tifreeze compatible with internal com-
bustion aluminum engines. This will
contribute to protect the environment.
Cooling system must be filled with wa-
ter and antifreeze solution (50% dem-
ineralized water, 50% antifreeze).
BRP sells premixed coolant with freez-
ing protection up to -37°C (-35°F)
(P/N 293 600 038).
______________
MAINTENANCE PROCEDURES
117