CyberData VoIP Ceiling Speaker Setup Manual page 10

13. After clicking on Save Settings, a reboot timer countdown will begin.
14. After the speaker reboots, the green Status LED on the speaker will blink at one second
15. To test the speaker, pick up any phone that is configured to the 3CX system and call the
16. When a connection is established (as indicated by a beep), speak into the phone and verify that
This step completes the procedure.
Server Setup Guide
intervals to indicate normal operation.
Note If Yes is selected for Speaker Beep After Initialization on the Speaker Setup page, you
will hear a tone after the initialization sequence is complete.
speaker's extension number.
you can hear your voice through the speaker.
Figure 4-8. Speaker Reboot Timer
930271B CyberData Corporation
10