Manual Buttonholes - Bernina activa 125 Owner's Workbook

M
ASTERING
Y
OUR
BERNINA
®
Owner's manual pg.____
• Fold one piece of fabric in half to 3" x 6". Press and insert the stabilizer.
• Draw a line 1½" from the fold along the 6" length.
• Mark two horizontal lines, running between the fold and the drawn line, spaced about 2" apart.
• Select buttonhole #10 – the standard buttonhole.
• Position the foot over the first short line, aligning the fold of the fabric with the
• Sew the first side of the buttonhole.
• Stop at the drawn line.
• Continue stitching the remaining steps of the buttonhole, following the directions in the owner's manual.
135 PE/145 only:
• Select keyhole buttonhole #11. Place the second short line under the presser foot as before.
• Sew the keyhole buttonhole on the second marked line.
• Cut one buttonhole open.
• Trim and mount the sample.
BERNINA
M Y
ASTERING OUR
BERNINA

MANUAL BUTTONHOLES

Fabric:
Stabilizer:
Needle:
Thread:
Presser Foot:
1/10/02
®
®
activa 125/135 PE/145
Heavy flannel, 6" x 6"
1 piece, 3" x 6"
90/14 Embroidery
30 weight cotton embroidery
Standard Buttonhole Foot #3
135 PE/145 only
5 / " marking behind the foot.
8
activa 125/135 PE/145/38