Resetting The Sunny Webbox Using The Reset Button - SMA SUNNY WEBBOX with Bluetooth User Manual

SMA America, LLC
8.4 Resetting the Sunny WebBox Using the Reset Button
You can reset the Sunny WebBox via a small hole in the rear side of the Sunny WebBox behind which
the reset button is located. For this the Sunny WebBox must be supplied with electricity.
Data backup
Before you reset the Sunny WebBox, take note of all settings such as network or portal
settings if necessary. In addition to this, back up the PV plant data in order to avoid data
losses.
Depending on how long you press the Reset button, the Sunny WebBox performs the actions listed in
the following table.
Duration
1 - 5 seconds
5 - 15 seconds
15 - 30 seconds
1. Use a sharp object to activate the hidden reset button
through the hole.
☑ The Sunny WebBox is now reset.
User Manual
Action
Reset the passwords to the factory setting. All other settings and PV
plant data will be saved.
Reset the network settings to the factory setting. All other settings
and PV plant data will be saved.
Resets all settings (event memory, network settings, modem
settings, portal settings and passwords) of the Sunny WebBox
back to the default values. PV plant data will be fully deleted.
SWebBox20-eng-BUS111312
Service Functions
73