Konica Minolta bizhub C31P User Manual page 59

FIN-
ISHING
JOB
SEPA-
RATION
IMAGE
ROTA-
TION
Configuration Menu Overview
Settings
SUB TRAY/MAIN TRAY/OFFSET/STAPLING
When SUB TRAY
tray.
When MAIN TRAY
put tray.
OFFSET
When is selected, the paper is fed to the main output
tray with each copy slightly shifted.
When STAPLING
main output tray.
The setting specified in the printer driver will override this menu
setting.
Settings
ON/OFF
The paper is fed to the main output tray with each print job slightly
shifted.
If FINISHING
out stacked on top of each other without begin shifted.
FINISHING
If
stapled before being fed out.
Settings
ON/OFF
ON
If is selected, the image is rotated 180 degrees before each
copy is fed out. If
PAPER TYPE
If
rotated.
is selected, the paper is fed to the sub output
is selected, the paper is fed to the main out-
is selected, each copy is stapled and fed to the
is set to SUB TRAY
STAPLING
is set to
OFF
is selected, the image is not rotated.
ENVELOPE
is set to
, the print jobs are fed
, the print jobs are
, the image cannot be
45