Konica Minolta bizhub C31P User Manual page 83

All factory default values are shown in bold.
PAPER
SOURCE
LAYOUT
PAPER
MARGIN
IMAGE
QUAL-
ITY
Configuration Menu Overview
Settings
TRAY1/TRAY2/TRAY3/TRAY4
Select the Lower Feeder Unit that is used for camera direct
printing.
TRAY3 and
feeder units are installed.
Settings
1-UP/2-UP/3-UP/4-UP/6-UP/8-UP
Specify the number of images printed on a single sheet of media.
When set to 1-UP
sheet of media.
Settings
STANDARD/MINIMUM
Select the size of the media margins (area that is not printed in).
STANDARD
If is selected, the standard media margin size is
specified.
If MINIMUM is selected, the media margins are reduced.
Settings
BRIGHT-
NESS
The brightness of the printed image can be
adjusted.
Settings
CONTRAST
The contrast of the image can be adjusted.
Settings
ECONOMY
PRINT
Select whether to print graphics with a reduced
density by reducing the amount of toner that is used.
If ON
reduced when printing.
If OFF
reduced when printing.
TRAY4 appear only if the optional lower
, only one image will be printed on a single
-15%/-10%/-5%/0%/+5%/+10%/
+15%
-15%/-10%/-5%/0%/+5%/+10%/
+15%
ON/OFF
is selected, the amount of toner used is
is selected, the amount of toner used is not
GLOSSY MODE
If
toner used is not reduced when printing, even
if ON was selected for this menu item.
ON
is set to , the amount of
69