Duplexing - Konica Minolta bizhub C31P User Manual

Duplexing

Select paper with high opacity for duplex (double-sided) printing. Opacity
refers to how effectively paper blocks out what is written on the opposite side
of the page. If the paper has low opacity (high translucency), then the printed
data from one side of the page will show through to the other side. Check
your application for margin information. For best results, print a small quantity
to make sure the opacity is acceptable.
Duplex (double-sided) printing can be done manually or can be done auto-
matically with the duplex option installed and selected.
Note
Only plain paper, 60–90 g/m
"Media Specifications" on page 104.
Duplexing envelopes, labels, letterhead, postcards, thick stock, glossy
media or transparencies is not supported.
How do I autoduplex?
You should verify that the duplex option is physically installed on the printer to
successfully duplex (double-sided) the job.
Check your application to determine how to set your margins for duplex
(double-sided) printing.
The following Binding Position settings are available.
1
1
1
1 1
132
If "Short Edge" is selected, the pages will be laid out to flip
at the top.
1
3
If "Long Edge" is selected, the pages will be laid out to flip
at the side.
1 3
2
(16–24 lb bond) can be autoduplexed. See
Duplexing