Konica Minolta bizhub C31P User Manual page 241

This message...
I-UNIT END
REPLACE
X
I-UNIT MISSING
CHECK X
STAPLER EMPTY
REPLACE STAPLE
CARTRIDGE
TONER OUT
REPLACE X
TONER MISSING
CHECK X
TRAY X EMPTY
"SIZE"
"MEDIA"
TRAYX PAPER ERR
"SIZE"
"MEDIA"
Status, Error, and Service Messages
means...
The X Print unit has
completely reached
the end of its life.
The X print unit is not
installed, or an unap-
proved print unit is
installed.
The staples are
empty when an
attempt was made to
print a staple job.
The X toner cartridge
is completely empty.
The X toner cartridge
is not installed, or an
unapproved toner
cartridge is installed.
The X (Tray 1, 2, 3 or
4) was specified with
the printer driver for
printing, but Tray X is
empty. This message
appears when the
PAPER MENU/
PAPER SOURCE/
TRAY CHAINING
OFF
menu is set to
The media size/type
set in the printer
driver is different from
the size/type of media
loaded. This message
appears when the
PAPER MENU/
PAPER SOURCE/
TRAY CHAINING
OFF
menu is set to
do this...
Replace the Print unit.
Install a correct KONICA
MINOLTA print unit.
Replace the staple car-
tridge.
Replace the toner car-
tridge.
Install a correct KONICA
MINOLTA toner car-
tridge.
Load the correct media
into the specified tray.
.
Load the correct media
size and type.
.
227