Locating A Desired Title/Group Using Number Buttons; Playing Back A Bonus Group - JVC TH-M606 Instructions Manual

Playback [
See page 22 for button locations. [
• Using number buttons on the remote control
• For DVD VIDEO (title, chapter):
While stopped, the title number is selected.
During playback, the chapter number is selected.
For DVD AUDIO (track):
During playback or while stopped
For VCD/SVCD (track):
During playback without PBC fimction
For CD/MP3/WMA/JPEG/MPEG4 (track/file):
During playback or while stopped
Press number buttons (0-10, +10) to select
the desired number.
• For details on using tile number buttons, see "How to use tile
number buttons" below.
How to use the number buttons
To select 3: Press 3.
To select 14: Press +10, then 4.
To select 24: Press +10 twice, then 4.
To select 40: Press +10 three times, then 10.
Or press +10 four times, then 0.
• During playback or while
stopped
1 Press TITLE/
GROUP.
" or .... is shown in the title/group display area in the
display window.
Example:
During DVD VIDEO playback
T__ 1 "23"45
2 While the display window shows ....
or "_", use number buttons (0-10, +10)
to enter the desired title or group
number.
The system starts playback from the first chapter/track/file of
the selected title/group.
• For details on using the number buttons, see "How to use the
number buttons" above.
NOTE
• This ligaturemay nul work lnr some discs.
Some DVD AUDIOs have a special group called "bonus
group" whose contents are not open to the public. The
bonus group is always assigned to the last group of a disc.
To play back a bonus group, you have to enter the specific "key
number" (a password). The way of getting the key number depends
on the disc. Alter getting the key mmlber, you can play back the
bonus group by following the procedure below.
• While the BONUS indicator lights up on the display window
1
Select the bonus group.
For selecting tile group, see "Locating a desired title/group
using number buttons" described above.
The key number entry indication appears.
On the TV
On the display window
KEY .....
L Press number buttons (0-9) to enter the
key number, then press ENTER.
When you enter tile correct key i_lumber, playback starts alad
the BONUS indicator goes off.
• If you enter the wrong number, reenter the correct number.
To clear the key number entry
Perform whichever one of the following:
• Press I.
• Open the disc tray.
• Turn off the system.
NOTE
• lfyouspecifyatrackinthebnnnsgroupforProgramPlayback,
the
key number entry indication in step I appears lk_r entering the key
number.
• In Random Playback, tracks in the bonus group are not played back.
25