Kodicom DN-1808S Manual For Installer And User page 49

7
[On/Off time]
Enable motion tracking only during selected time.
The default is set from 00:00 to 24:00. To change
time, simply select from the scroll list.
8
[Disable PTZ mode]
Enable or disable PTZ control during motion tracking.
Uncheck it to enable controlling the camera manually
during motion tracking.
9
[Range] [PAN]
Assign how wide the camera can move horizontally
from it's starting position. The minimum value of left
and right is 40º and the sum of left and right value
cannot exceed 360º. If the sum value exceeds 360º,
the system will adjust the angle automatically.
10
[Screen value]
The Pan value changes to
currently pointing.
Kodicom DN Manual
9
10
11
12
13
14
where the camera's
7
8
11
[Enable]
Enable or disable PAN movement. Disabling this option will
prevent the camera from moving horizontally.
12
[TILT]
[Range]
Assign how wide the camera can move vertically from it's
default starting position (default starting position for TILT
is always set to 0º). TILT value cannot exceed 90º.
13
[Screen value]
The TILT value changes to where the camera's currently
pointing.
14
[Enable]
Enable or disable TILT movement. Disabling this
option will prevent the camera from moving vertically.
50