Connecting Pan/Tilt Drive - Kodicom DN-1808S Manual For Installer And User

1.5 Connecting PAN/TILT drive

RUN LED
TXD LED
RXD LED
EXTERNAL MONITOR
Remote Controller Receiver
RS-422 Connection
(from RX-Receiver)
RS-232 Connection
(from Com1 port)
Make sure positive (+) and minus (-) signs are correct. Connecting to wrong side may cause
!
damage to the system.
Please contact your distributor when using other RX Receiver brand.
Kodicom DN Manual
SIGNAL ( + )
Not in use
SIGNAL ( - )
10