Controls - Kodicom DN-1808S Manual For Installer And User

1.11.3 Hardware setup - Controls
2
1
1
[Setup]
Check the box to use the controls.
2
[Name]
Type in control names. Up to 14 characters are
allowed.
3
[Auto On/Off]
Auto function automatically activates controls
during selected time. To enable Auto function,
choose the time from scroll list. Default is set from
00:00 to 24:00.
Kodicom DN Manual
3 4 5
Controls are used to turn on
and off sirens, alarms, lights
... when certain events occur
e.g. motion detected or a
sensor triggered.
4
[Sensor]
To connect a sensor to a control, type the number of the
sensor on appropriate control number.
If you wish to connect multiple sensors to a control, type
the sensor numbers in the box, separating them by comma.
Example: In order to turn on Control 3 when Sensor 1 or
Sensor 2 triggers, type "1,2" in the box against Control 3.
5
[Working sec]
Assign how long the control will stay active once it is
triggered. Maximum is 255 seconds and default is 0
seconds.
19