Kodicom DN-1808S Manual For Installer And User page 18

1.11.2 Hardware setup - Sensors
[Setup]
1
Check the box to enable sensors. Unchecked
the box to disables sensors.
2
[NC/NO]
Choose sensor type. Click the button to switch
between [NC] and [NO] sensor types.
• NC = Normally Close type. If the door/object with
the sensor installed is not closed, the sensor will
trigger.
• NO = Normally Open type. If the door/object with
the sensor installed is not open, the sensor will trigger.
Kodicom DN Manual
2
3
1
4
3 [Use alarm]
Selecting [Use alarm] will enable the built-in internal
speaker to beep if a sensor is triggered. The speaker
however will not beep if the corresponding camera
schedule is set to Continuous Recording (see page
26).
4
[Recording Time]
Select the number of seconds to record when a
sensor is triggered. This function will not work if the
recording schedule is not set to Sensor or Motion
(see page 26).
18