Kodicom DN-1808S Manual For Installer And User page 23

13
14
15
16
8
[Area Clear]
Delete Detection Area for selected camera. To manually
delete an area, simply drag the detection area outside
the channel screen.
9
[Area Draw]
Assign entire channel view as detection area.
10
[Camera Adjustment]
Adjust brightness, hue and contrast for each camera.
Caution: Adjusting these options will affect recorded data.
11
[Color]
If the camera is black-and-white, click [Color] to change
the channel into Black and White. Default is set to Color
for all channels.
[Default]
12
Set values in and
10 11
13
[Set quad rotation time]
Select rotation time for Channel Rotation. See
[Channel Rotation] on page 55
!
Do not set the time to 0. The channels will
rotate too fast.
Kodicom DN Manual
8
10
11
17
back to default.
9
9
12 12
14
[Full screen when motion]
The channels of the cameras specified in this box will
change to full screen if they detect motion. If you wish
to select multiple cameras, type the camera numbers
in the box, separating them by comma.
15
[Delay Time (sec)]
Delay Time works in conjunction with [Full screen
when motion], and will freeze the channel if motion
is detected on cameras with [Full screen when
motion] enabled. To enable Delay Time, select the
number of seconds from scroll list.
16
[No full screen]
Cancels options set on [Full screen when
motion] and [Delay time].
17
[Color of Motion Area]
When a camera detects motion its channel will
highlight the Detection Areas by the color you
select here (Red or Green)
18
[AGC On/Off]
In all 16 channel DN34xx and DN35xx series
which has KMC-9116 board installed, you
can adjust the brightness of the image
automatically using this button. Just click to
have this function turned on.
23