E-Map - Kodicom DN-1808S Manual For Installer And User

1.23 E - Map
1
[Check Emap]
Check the box to enable E-map.
2
[Position No.]
2a
For a split screen mode
which channel the E-Map will be displayed (scroll
list option may vary depending on DN model).
You can copy E-map settings to another channel of
another split screen mode by clicking on
select the split screen mode and the channel
number you wish to copy to.
3
[User Image copy]
Click Find and select the image file to use as an E-
map, then click Go! to display the image.
The DVR will automatically copy the image to its
backup folder. The backup file will be overwritten
when another E-Map image file is selected.
The image file must be in BMP format.
Kodicom DN Manual
1
1
2
2
3
3
4
4
6
8
you can assign on
2b and
E-Map tab contains the
settings for E-Map. E-Map is
computer map of the area
with designated locations of
2a
installed cameras, sensors
2b
and controls
5
7
4
[Setting]
You can mark positions of the installed cameras, controls,
and sensors on the E-Map.
To mark a device, select its type
6
sensor) and its number
the scroll list on the right
device on the E-Map to insert the device's icon.
• When device type is Camera, you can choose CCD,
Pinhole, or Speed Dome cameras in
• When device type is Control, you can choose Light or
Alarm controls in .
7
• When device type is Sensor, you can choose Fire, Laser,
or Heat sensors in .
7
[Delete camera, control, sensor]
To delete a device from the E-map, enable Delete camera,
8
control, sensor and click on the device's icon on
the E-Map. To delete all icons, disable Check Emap
option .
5
(camera, control or
. Then select the device from
7
and click to the location of the
.
7
1
53