Priming/Flushing Water System - Cornelius Quest Elite 2000 Instruction Manual
Hide thumbs
Also See for Quest Elite 2000:
- Technical specifications (2 pages) ,
- Installation manual (22 pages)
Table of Contents
Advertisement
Quest Elite 2000 Installation Manual
PRIMING/FLUSHING WATER SYSTEM
To properly prime the unit with water and remove air pockets in the system, open the
cabinet door and make sure that all the valve levers are in the Dispense position.
Close the door and press the dispense button for a few seconds. Repeat until a
steady flow of water is observed from all dispense valves.
NOTE: Some splashing may occur during this purge cycle.
Static Mixer
Dispense Nozzle
Figure 8. Dispense Nozzle
© 2010, IMI Cornelius Inc.
- 13 -
Publication Number: 620048922INS
- Quick Links:
- Programming the Portion Control
Hide quick links:
Advertisement
Table of Contents
