Accessories; Interchangeable Canopies - Aarrow Becton 7 Operating & Installation Manual

ACCESSORIES

ACCESSORIES
STANDS
Elegant stands are available for the Becton free-standing fires. These increase the height of the appliance and
rear flue outlet by approximately 150mm (6''). Check current brochure for details.
TRACERIES
For added decorative effect, beautiful Door Traceries are available for the complete Becton fires range.
PAINT
Matching aerosol paint to tone in any connecting flues, pipes or surrounding metalwork.

INTERCHANGEABLE CANOPIES

•To fit the interchangeable canopy (Fig 8): Remove the front clamps.
•Tilt the canopy as shown in stage 1.
•Engage the rear clips and pull fully forward.
•Fit the front clamps and tighten.
•Fit the required blanking plates as shown in stage 2.
Traditional canopies (High or Low) are available for Becton 7, 11, 18, For the Becton 'Bunny' only a low
canopy only is available. They are easy to fit and can always be added afterwards.
Fig 8
Becton Multifuel Stoves 15