Table of Contents
Advertisement
ACCESSORIES
ACCESSORIES
STANDS
Elegant stands are available for the Beacon multifuel stoves. These increase the height of the appliance and
rear flue outlet by approximately 100mm (4'').
TRACERIES
For added decorative effect, beautiful Door Traceries are available to complete your Beacon multifuel stove.
PAINT
Matching aerosol paint to tone in any connecting flues, pipes or surrounding metalwork.
INTERCHANGEABLE CANOPIES
•To fit the interchangeable canopy (Fig 8): Remove the front clamps.
•Tilt the canopy as shown in stage 1.
•Engage the rear clips and pull fully forward.
•Fit the front clamps and tighten.
•Fit the required blanking plates as shown in stage 2.
Traditional canopies (High or Low) are available for your Beacon multifuel stove. They are easy to fit and
can always be added afterwards.
Fig 8
Beacon Multifuel Stoves
15
Advertisement
Table of Contents
