Xerox CopyCentre C123 Quick Reference Manual page 140

11 Problem Solving
Code
016-732
016-735
016-748
016-749
016-756
016-757
016-758
016-759
016-760
016-761
016-762
016-764
016-765
016-766
016-767
016-768
016-769
016-771
016-772
016-773
138
The form specified in the emulation setting is not registered in the host
computer. Resend the form data.
An attempt was made to print a job template while it was being updated. Wait a
while, and then instruct it to print again.
Printing is not possible due to insufficient disk space. Reduce the number of
pages in print data, for example by dividing the print data or printing one copy at
a time when making multiple copies.
A PJL command syntax error occurred. Check the print settings, or correct the
PJL command.
The use of the service is restricted. Contact the Key Operator.
A wrong password was entered. Enter the correct password.
The account is not authorized for copying. Contact the Key Operator.
The maximum number of copies has been reached. Contact the Key Operator.
An error occurred during PostScript processing. Take one of the following
actions.
• Set for optimized speed in the print driver.
• Increase the size of the print page buffer.
• Increase PostScript memory.
An error occurred during image processing. Set for optimized speed in the print
driver and instruct the machine to print again. If this does not rectify printing, set
for highest compatibility to ensure printing and try again.
A print language not supported on the machine was specified. Specify the print
language in [Print Mode] under [Port Settings].
Could not connect to the SMTP server. Contact the System Administrator.
Could not send e-mail as the disk on the SMTP server was full. Contact the
System Administrator.
An error occurred on the SMTP server. Contact the System Administrator.
Could not send e-mail as the e-mail address was wrong. Verify that the e-mail
address is correct, and try sending the e-mail again.
Could not connect to the SMTP server as the e-mail address of the machine
was incorrect. Check the e-mail address of the machine.
The SMTP server does not support delivery confirmation (DSN). Send e-mail
without setting confirmation.
Could not acquire the scan data repository address by CentreWare Scan
Services. Specify the correct DNS address. Alternatively, set the address of the
scan data repository as an IP address.
The IP address of the machine is not set correctly. Check the DHCP
environment. Alternatively, manually specify an IP address of the machine.
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 Quick Reference Guide
Description and Remedy