Xerox CopyCentre C123 Quick Reference Manual page 125

Paper Jams in Cover A - page 124
Paper Jams in Cover B - page 125
Paper Jams in Cover C - page 126
Paper Jams in Cover E - page 126
Paper Jams in Trays 1, 2, and 3, 4 (Optional) - page 127
Paper Jams in the Tandem Tray Module (Optional) - page 127
Paper Jams in Tray 5 (Bypass) - page 128
Paper Jams in the Duplex Module Cover D (Optional) - page 128
Paper Jams in the Finisher (Optional) - page 129
Media jams happen for a variety of reasons. Check the guidelines below to reduce
potential jams in the machine.
• Use only recommended media. Refer to Supported Paper Sizes in the Paper and
Other Media chapter on page 89 and Machine Specifications in the Specifications
chapter on User Guide for a list of recommended media types.
• Protect unused media by storing it in its wrapper, on a flat surface.
• The orientation of the media in the paper tray must match the orientation of the
documents.
• Check the maximum fill line in the tray to make sure the paper tray is not overloaded.
• Do not use media that is torn, wrinkled, or folded.
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 Quick Reference Guide
Finisher Transport
Cover F
Tray 3 - Tandem
Tray Module
(Optional)
Tray 4 - Tandem Tray Module
(Optional)
Paper Jams
Finisher Top Cover
Finisher Tray
123