215: L1 Heater Roller Problem; 216: L2 Heater Roller Problem; 217: Debow Problem; 218: Impresser Problem - DataCard SD Series User Manual

215: L1 heater roller problem

The laminator has encountered a critical error. The card will be canceled.
1.
Press the printer Power button to power off the system.
2.
Request service. The system must remain powered off.

216: L2 heater roller problem

The laminator has encountered a critical error. The card will be canceled.
1.
Press the printer Power button to power off the system.
2.
Request service. The system must remain powered off.

217: Debow problem

The laminator has encountered an error in the debow area.
1.
Remove the card.
2.
Press the printer Power button to power off the system.
3.
Press the printer Power button again to power on the system.
4.
If the problem occurs again, request service.

218: Impresser problem

The laminator has encountered a critical error. The card will be canceled.
1.
Press the printer Power button to power off the system.
2.
Request service. The system must remain powered off.

219: Impresser sensor problem

The laminator has encountered a critical error. The card will be canceled.
1.
Press the printer Power button to power off the system.
2.
Request service. The system must remain powered off.

220: Impresser heater problem

The laminator has encountered a critical error. The card will be canceled.
1.
Press the printer Power button to power off the system.
2.
Request service. The system must remain powered off.
74 Troubleshooting