3.
Remove the protective paper from
both sides of the double‐sided,
sticky laminator cleaning card and
insert the card under the rollers of
the card exit slot of the laminator.
When it is in the correct location and
pushed in far enough, the card stays
in place.
4.
Use the LCD menu system to start the cleaning cycle.
A.
B.
C.
SD Series Card Printer User's Guide
Begin when the printer displays
green. Press the U
SER
Suspended
displays on line 1 of the LCD panel.
Press the E
key to enter the menu system.
NTER
Maintenance
displays on line 2 of the LCD panel. Press the E
Maintenance
enter the
Ready
and the U
button.
menu.
button shows steady
SER
key to
NTER
A-13