Down Arrow, Up Arrow, and Enter Key
Use the arrow keys to move through the printer menu system, and the E
to make a selection.
Press the up or down arrow key while the LCD panel displays
additional information about the printer on line 2, including the firmware version,
printer model, serial number, and network IP address or USB IP address. The
SD460 laminating system also displays the laminator firmware version and the
laminator serial number. If you don't press a key for 30 seconds, the LCD panel
returns to the default
Ribbon Light
The ribbon indicates the status of the print ribbon in the printer. Indicators
include the following:
Off
Blinking amber
Card Light
The card light indicates the status of cards in the printer. Indicators include the
following:
Off
Blinking amber
16
Ready
message.
The print ribbon is okay.
A blinking light indicates one of
the following:
The printer problem applies
•
to the print ribbon.
The print ribbon is low.
•
The print ribbon is out.
•
Cards are okay.
A blinking light indicates either of
the following:
No card is detected for the
•
print job. Insert a card to
continue printing.
Scheduled printer cleaning is
•
due. Insert a cleaning card
now, or set aside time to run
a cleaning card.
key
NTER
Ready
to display
Using the System