208: L2 Supply Type Problem; 209: L2 Supply Not Supported; 210: L2 Supply Not Identified; 211: L1 Heater Problem - DataCard SD Series User Manual

208: L2 supply type problem

The laminator cannot use the supply installed.
Use supplies designed for this laminator.

209: L2 supply not supported

The laminator cannot use the supply installed.
Use supplies designed for this laminator.

210: L2 supply not identified

The laminator cannot use the supply installed.
Use supplies designed for this laminator.

211: L1 heater problem

The laminator has encountered a critical error. The card will be canceled.
1.
Press the printer Power button to power off the system.
2.
Request service. The system must remain powered off.

212: L2 heater problem

The laminator has encountered a critical error. The card will be canceled.
1.
Press the printer Power button to power off the system.
2.
Request service. The system must remain powered off.

213: L1 heater sensor problem

The laminator has encountered a critical error. The card will be canceled.
1.
Press the printer Power button to power off the system.
2.
Request service. The system must remain powered off.

214: L2 heater sensor problem

The laminator has encountered a critical error. The card will be canceled.
1.
Press the printer Power button to power off the system.
2.
Request service. The system must remain powered off.
SD Series Card Printers User's Guide 73