Messages And Conditions; Messages On The Printer Lcd - DataCard SD Series User Manual

Messages and Conditions

When the printer cannot process the card sent, it issues a condition. The LCD
panel on the front panel shows these conditions. When you use the XPS Card
Printer Driver, the printer driver also displays the condition as a message on the
PC. In a shared printer environment, messages can differ slightly from the
messages and conditions described in this section.
Messages on the Printer LCD
•
Messages from the XPS Card Printer Driver on the PC on page 60
•
Messages from Printer Manager on page 60
•
Other Messages on page 60
•

Messages on the Printer LCD

All messages are associated with a print job. The printer issues messages that
focus on recovering from problems.
The printer displays a message number and a short description for each
•
message.
If more than one message was issued, the next message displays after you
•
correct the problem and press the U
The lights on the front panel flash while messages display on the LCD panel.
•
No. LCD Message
100 Request not supported
101 Job could not complete
102 Card not in position
103 Printer problem
104 Critical problem
105 Magstripe data error
106 Magstripe data not found
107 Magstripe read data error
108 Magstripe read no data
56
button.
SER
User Light Supply Light
Amber Flash Off
Amber Flash Off
Amber Flash Off
Amber Flash Off
Amber Flash Amber Flash
Amber Flash Off
Amber Flash Off
Amber Flash Off
Amber Flash Off
Card Light Sound
Off Error
Off Error
Amber Flash Error
Off Error
Amber Flash Error
Off Error
Amber Flash Error
Off Error
Amber Flash Error
Troubleshooting