Print Cards; Print From Id Software; Print From Other Software - DataCard SD Series User Manual

Print Cards

Make sure that cards are loaded in the printer or available to insert when
prompted. For the steps to follow, refer to "Load Cards" on page 19.

Print from ID Software

1.
From the ID software, use the template or create a design for the card.
2.
Select the printer if you use more than one printer.
3.
Enter the data for the card. Follow the instructions for your software.
4.
Capture the photo for the card, if necessary.
5.
Click the Print button to send the card to the printer.
6.
At the printer, insert a card in the single‐feed slot, if necessary.

Print from Other Software

1.
Open the software application and select the
card printer as the current printer.
2.
Use the application's setup page to select the
ISO ID‐1 page size, or set the page size to
2.13 x 3.38 in.
3.
Set the margins to 0 (zero).
4.
Select an orientation—portrait or landscape.
5.
Create the card design:
A.
B.
C.
For information about additional card
features, refer to "Elements of Card Design" in
your printer's Installation and Administrator's
Guide.
24
Add graphics, such as a company logo or background.
Add a photo.
Add text information, such as name,
address, or employee number.
Printing Cards