Setting The Water Temperature Alarm; Setting The Water Depth Alarm; Setting The Wind Velocity Alarm - JRC NWZ-4610 Instruction Manual

4.8.5.

Setting the water temperature alarm

An alarm occurs when the water temperature exceeds the set value.
Procedure
1. Refer to "4.9.1 Changing to a maintenance mode" to display the maintenance menu.
2. Press the
3. Press the
4. Press the
5. Press the
6. Refer to "4.8.11 Setting a buzzer sound and screen back light" to set the alarm sound and screen
brightness.
4.8.6.

Setting the water depth alarm

An alarm occurs when the water depth exceeds the set value.
Procedure
1. Refer to "4.9.1 Changing to a maintenance mode" to display the maintenance menu.
2. Press the
3. Press the
4. Press the
5. Press the
6. Refer to "4.8.11 Setting a buzzer sound and screen back light" to set the alarm sound and screen
brightness.
4.8.7.

Setting the wind velocity alarm

An alarm occurs when the wind velocity exceeds the set value.
Procedure
1. Refer to "4.9.1 Changing to a maintenance mode" to display the maintenance menu.
2. Press the
3. Press the
4. Press the
5. Press the
6. Refer to "4.8.11 Setting a buzzer sound and screen back light" to set the alarm sound and screen
brightness.
4-30
key to select "ALARM" and "WATER TEMP" in order.
key to select "OVER," "UNDER," "IN RANGE," or "OUT RANGE."
key to select "OVER," "UNDER," "MAXIMUM," or "MINIMUM."
key to enter the water temperature, and press the
key to select "ALARM" and "DEPTH" in order.
key to select "OVER," "UNDER," "IN RANGE," or "OUT RANGE."
key to select "OVER," "UNDER," "MAXIMUM," or "MINIMUM."
key to enter the water depth, and press the
key to select "ALARM" and "WIND" in order.
key to select "OVER."
key to select "OVER."
key to enter the wind velocity, and press the
key.
key.
key.