JRC NWZ-4610 Instruction Manual page 104

3) Interface
(1) Serial Transmission
Channel
DATA IN/OUT1
DATA IN/OUT2
DATA IN/OUT3
DATA IN/OUT4
RS-485
(1-1) NMEA
 Specification:
 Version:
 Bit rate:
 Data bit:
 Parity:
 Start bit:
 Stop bit:
 Output sentence
 Output interval:
Note) Som combinations of output sentence, bit rate, and output intervals may not be possible.
(1-2) IEC
 Specification:
(2) Contact signal
Channel
CONTACT
CONTACT
9-2
Specification
RS-422 Input or Output
RS-422 Input or Output
RS-422 Input or Output
RS-422 Input or Output
RS-485 Input
Output
NMEA
Ver1.5, 2.1, 2.3, 4.0
4800, 9600,19200,38400bps
8bit
None
1bit
1bit
ACK,CUR,DBK,DBS,DBT,DPT,GGA,GLL,GNS,HDG,HDM,HDT,MDA,MHU,MMB,
MTA,MTW,MWV,RMC,ROT,RPM,RSA,THS,VBW,VDR,VHW,VLW,VTG,VWR,VWT
,XDR,ZDA
1s, 2s, 3s, 4s, 5s, 6s, 7s, 8s,9s, OFF
IEC61162-1 ed.4
I/O Notes
OUTPUT 200p/NM, 400p/NM
INPUT ACK, Input of external dimmer
Notes
NMAE, IEC
NMEA, IEC
NMEA, IEC
NMEA, IEC Daisy chain
NMEA, IEC