JRC NWZ-4610 Instruction Manual page 42

Multi information display
Hide thumbs Also See for NWZ-4610:
Table of Contents

Advertisement

Select a category
3.
Select a category by using
4.
Select display contents by using
5.
Go to procedure 6 when setting an auto screen.
Fixed screen and graphic screen
2.
Select "DISPLAY" by using
3.
Select display contents by using
4.
Go to procedure 6 when setting an auto screen.
Table4-1 Display category and display contents
Category
OWN SHIP
WEATHER
DOPPLER
ENGINE
Special screen
Graphic screen
Setting an auto screen
On an auto screen, set a screen switching time and whether a buzzer sound is emitted at screen
switching.
6.
Select "ON" or "OFF" under "AUTO SCREEN" by using
7.
Select "SOUND1","SOUND2" or "OFF" under "SOUND" by using
4-20
and press
and press
and press
and press
Display contents
LAT/LON, SOG, COG, HDG(Heading), ROT, PITCH, ROLL, HEAVING
Temperature, true wind direction, true wind velocity, relative wind direction,
relative wind velocity, air temperature, atmosphere, humidity
Forward/backward speed through water, bow speed through water, stem
speed through water, forward/backward speed over ground, bow speed
over ground, stem speed over ground, layer L1 current direction, layer L1
current speed, layer L2 current direction, layer L2 current speed, layer L3
current direction, layer L3 current speed, TRIP, ODO (Odometer), water
depth
Rudder angle, engine speed, shaft speed
Single mode water depth, dual mode water depth, wind direction/wind
velocity
Speed1,Speed2, rudder angle, wind direction, water depth graph, water
temperature graph
.
.
.
.
and press
Select a display
content
.
and press
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents