Nomadix AG 5500 User Manual page 61

AG 5500
Select Network Interface Configuration Mode:
0 - Static
1 - DHCP Client
2 - PPPoE Client
Select the Network Interface Configuration Mode: [0]:
Enter network interface IP
Enter subnet mask
Enter default gateway IP
Please enter your ISO country code
Please enter your phone country code
Please enter your calling area code
Please enter your network SSID/Zone
The system must be reset to function properly. Reboot? [yes/no]: y
Your new settings are displayed and the AG 5500 reboots. When the system restarts, the
Telnet interface is enabled (based on your new configuration settings which are saved to
the AG 5500's on-board flash memory).
Start up configuration is now complete; however, before connecting the AG 5500
to the customer's network, you must power down the system.
Go to "Logging Out and Powering Down the System" on page
Installing the AG 5500
[ ]:
[ ]:
[ ]:
[US]: US
[1]:
[818]: 818
[ ]: samplezonename
50.
1
49