Table of Contents
Advertisement
3.2.2 Ports Configuration
Parameter description:
Set the speed and duplex of the port. Speed/Duplex is comprised of the combina-
Mode
tion of speed mode, 10/100/1000Mbps, and duplex mode, full duplex and half
duplex. In Auto Speed mode, no default value. In Forced mode, default value
depends on your setting.
Flow Control
There are two modes to choose in flow control, including Enable and Disable. If
flow control is set Enable, both parties can send PAUSE frame to the transmit-
ting device(s) if the receiving port is too busy to handle. When it is set Disable,
there will be no flow control in the port. It drops the packet if too much to
handle. Default: Enable
-16-
Advertisement
Table of Contents
