Ports - KTI Networks KGS-612F User Manual

4.5 Ports

Configuration
Enable Jumbo Frames
Port
Link
Mode
Flow Control
[SFP DDM]
[Apply]
Notes:
1. For 100M fiber application on Port 4 and Port 5, it is necessary to configure 100 Full for
the port with fiber connection.
2. For 1000M fiber application on Port 6, just leave the default port configuration Auto for
fiber connection.
Function
Select to enable jumbo frame support
The port number
Speed and duplex status with green background - port is link on
Down with red background - port is link down
Select port operating mode
Disabled - disable the port operation
Mode Auto-negotiation
Auto Enable
10 Half Disable
10 Full Disable
100 Half Disable
100 Full Disable
1000 Full Enable
Force 1000 Full Disable
Set port flow control function
v - set to enable 802.3x pause flow control for ingress and egress
Click to display DDM information and status of the SFP transceivers
Click to apply the configuration change
Speed capability
10, 100, 1000M
10M
10M
100M
100M
1000M
1000M
-29-
Duplex capability
Full, Half
Half
Full
Half
Full
Full
Full