Table of Contents
Advertisement
3.2.3 VLAN Mode Configuration
The switch supports Port-based VLAN and 802.1Q Tag-based VLAN. Support 24 active VLANs and
VLAN ID 1~4094.
Parameter description:
VLAN Mode
Disable - Stop VLAN function on the switch. In this mode, no VLAN is applied
to the switch. This is the default setting.
Port-based - Port-based VLAN is defined by port. No filtering criterion applies
in port-based VLAN. The only criterion is the physical port you connect to.
Tag-based - Tag-based VLAN identifies its member by VID. This is quite
different from port-based VLAN. Each tag-based VLAN you built up must be
assigned VLAN name and VLAN ID. Valid VLAN ID is 1-4094.
Metro Mode - The Metro Mode is a quick configuration VLAN environment
method on Port-based VLAN. It will create 22 or 23 Port-based VLAN groups.
Up-link Port
This function is enabled only when metro mode is chosen in VLAN mode.
23 - Except Port 23, each port of the switch cannot transmit packets with each
other. Each port groups a VLAN with Port 23, thus, total 23 groups consisting of
2 members are formed.
24 - Except Port 24, each port of the switch cannot transmit packets with each
other. Each port groups a VLAN with Port 24, thus, total 23 groups consisting of
2 members are formed.
23&24 - Except Port 23 and Port 24, each port of the switch cannot transmit
packets with each other. Each port groups a VLAN with Port 23 and Port 24,
thus, total 22 groups consisting of 3 members are formed.
This switch can support up to maximal 24 port-based VLAN groups or 24 Tag VLAN groups.
Management Interface:
It works when the tag-based mode is chosen. When this function is enabled, only the
State
tagged packets with this VID can manage the switch.
Valid range 1~4094.
VID
-17-
Advertisement
Table of Contents
