3.2.4 VLAN Group Configuration
It shows the existed information of VLAN Groups List and maintains them, i.e. modify and delete one
of them. You can easily create and delete a VLAN group by pressing <Add Group> and <Delete
Group> function buttons, or click the Group ID directly to edit it.
Parameter description:
When you want to edit a VLAN group, you must select the Group ID field.
ID (Group ID)
Then, you will enter Tag-based VLAN Group Setting or Port-based VLAN
Group Setting page, which depends on your VLAN mode selection.
Description
The description defined by administrator is associated with a VLAN group.
VID
VLAN identifier. Each tag-based VLAN group has a unique VID. It appears
only in tag-based mode.
This is used to enable or disable if a port is a member of the new added VLAN,
Member
[Enable] means it is a member of the VLAN. Just tick the check box (t) beside
the port x to enable it.
<Add Group>
Create a new port-based VLAN or tag-based VLAN, which depends on the
VLAN mode you choose in VLAN mode function.
Add a Port-based VLAN group
-18-