Table of Contents
Advertisement
3.2.6 Aggregation Configuration
The Aggregation (Port Trunking) Configuration is used to configure the settings of Link Aggregation.
You can bundle more than one port with the same speed, full duplex and the same MAC to be a single
logical port, thus the logical port aggregates the bandwidth of these ports.
Parameter description:
Set up the ports that do not join any aggregation trunking group.
Normal
Group 1~8 Group the ports you choose together. Up to 12 ports can be selected for each group.
Note:
Check the following to avoid errors in configuration - When configuring the link aggregation
function, you should check that whether the aggregated ports are in full-duplex mode as well as
their speed is the same or not. The aggregated ports are in the same VLAN group.
-21-
Advertisement
Table of Contents
