Warm Restart - KTI Networks KGS-2402 Installation Manual

Mirror
Sniffer Mode:
Sniffer Port:
Source Port:
Trap Event
Trap IP
Trap IP
Warm Boot
Cold Boot
Illegal Login
Link Up
Link Down
Rx error threshold
Tx error threshold
Error threshold
Maximum Packet Length
Jumbo Frame(bytes):
<Refresh>

3.4.2 Warm Restart

Warm Start function allows to reboot the switch with the current settings and configuration. After
upgrading software, then you must reboot to have the new configuration taken effect.
Press <Yes> button to confirm warm restart function, and it will take around thirty (30) seconds to
complete the system boot.
Display the status the activation or deactivation of Port Mirror function.
Display the port for monitoring.
Display the port for being monitored.
The IP address of the first Trap manager
The IP address of the second Trap manager
Trap event enable setting
Trap event enable setting
Trap event enable setting and counter
Trap event enable setting and counter
Trap event enable setting and counter
Trap event enable setting and counter
Trap event enable setting and counter
Setting
Display the settings about the maximum length of the packet that each port
of the switch can accept.
Button to refresh all status
-37-