Introduction; Features - KTI Networks KGS-2402 Installation Manual

1. Introduction

Before you start installing the switch, verify that the package contains the following:
•
Web Smart 24-Port 10/100/1000 Gigabit Ethernet Switch unit
•
19" rack mounting brackets
•
This User Manual in CD-ROM
•
AC Power Cord

1.1 Features

• Non-blocking store-and-forward Web-Smart switched.
• 24 10/100/1000Mbps Auto-negotiation Gigabit Ethernet copper ports
• 2 1000Mbps Gigabit Ethernet fiber ports (support dual media types, fiber and copper)
• 400KB on-chip frame buffer
• Jumbo frame support
• Diversified classification supports for QoS (even L4 support)
• 8K MAC address and 4K VLAN support (IEEE802.1Q)
• Per-port bandwidth rate control and Broadcast Storm Control
• IEEE802.1Q VLAN support
• Full-duplex flow control (IEEE802.3x) and half-duplex backpressure
• Extensive front-panel diagnostic LEDs; System: Power, Copper Port1-24: LINK/ACT, 10/100/
1000Mbps and SFP LINK/ACT
Management
• Supports concisely the status of port and easily port configuration
• Supports per port traffic monitoring counters
• Supports port mirror function
• Supports the static trunk function
• Supports 802.1Q VLAN
• Supports user management and limits one user to login
• Maximal packet length can be up to 9216 bytes for jumbo frame application
• Supports Broadcasting Suppression to avoid network suspended or crashed
• Supports to send the trap event while monitored events happened
• Supports default configuration which can be restored to overwrite the current configuration
which is working on via Web UI and Reset button of the switch
• Supports on-line plug/unplug SFP modules
• Supports Quality of Service (QoS) for real time applications based on the information taken from
Layer 2 to Layer 4, such as VoIP
• Built-in web-based management with convenient GUI for the user
-6-