Shock Absorbers - Rear Swing Arm - Puch 1980-1981 Maintenance Manual

SHOCK ABSORBERS - REAR SWING ARM
SHOCK ABSORBERS
Shock absorbers are not serviceable, faulty units must be
replaced.
Only the upper and lower rubber mountings and bearing
bushings are available.
MAGNUM MKII
This shock absorber is a true hydraulic unit but not service-
able, if faulty, replace as a unit.
I l : •— •
i £ w i
REAR S W I N G ARM
Remove engine according to repair manual.
Remove rear axle nuts (2), loosen chain tensioners (1), rear
brake cable adjustment (4), disconnect cable from backing
plate and actating lever (3) remove rear wheel.
f ^ ^
43^ '_^fc
-••--••
«j^j!B(gH
* •
^ ^ • • ^ ^
E 3
^ ^
Remove lower shock absorber mounting hardware.
- 9 5 -