Puch 1980-1981 Maintenance Manual page 75

ASSEMBLE ENGINE • 2 SPEED
I
Place new locking tab washer and replace nut.
i
4
Lock the first speed clutch and second gear main shaft using
special tools no. 905.6.36.110.2 and 905.6.36.109.2. Torque
nut to 22 - 29 ft/lb (30 - 40 Nm) and secure lock nut with
the locking tab washer. Remove clutch locking tool.
Lubricate bushing on end of crankshaft and install clutch
drum.
- 7 6 -
i
l