Table of Contents
Advertisement
SPOKING WHEEL
SPOKING WHEELS
Respoking requires the knowledge of correct sequence of the
spokes in hubs and rims. Spokes of our models are 3 times
crossed, that is, each spoke crosses 3 other spokes. The
correct spoking procedure is outlined as follows.
f*"'**"^
A. Front wheel:
Marking of hub and rim.
Rim: Mark all spoke holes on the rim, starting with no. 1,
next to the valve hole, up to 36 in the right hand direction
(clockwise).
I^zl
Hub: The brake drum facing downward, mark the lower spoke
holes (brake drum side) from 1 to 18 in the right hand direc-
tion (clockwise). (See fig.).
Mark the upper spoke holes (opposite brake drum), starting
with A to R in the right hand direction (clockwise). (See fig.)
NOTE:
The upper hole marked A must be just to the left of
the lower hole marked 1.
E ^
•102-
Hide quick links:
Advertisement
Table of Contents
