IMPORTANT:
1. To prevent the lens from fogging up, you must replace the silica gel
bag every time you open the camera. The gel bag loses its
effectiveness when the dry camera is opened.
2. Make sure the housing cover is properly secured to prevent water
from entering and damaging the inner housing.
5.3.2 In-Ceiling Mount
1.
Follow step 1 in the Hard-Ceiling Mount section to remove the housing
cover, thread lock and back cover, and take out the camera body.
2.
Cut out a circle with a diameter of 142 mm on the ceiling.
3.
Insert a blue screw to the indicated holes on the camera body.
5
Vandal Proof IP Dome
57