Output Terminal - AMC iA 480X User Manual

Power amplifiers

Hide thumbs Also See for iA 480X:

Table of Contents

BALANCED PHOENIX AND STEREO RCA INPUT

Connect audio signal to electronically balanced phoenix connector or to stereo RCA. Please note that the

iA480X needs at least 0 dBu to achieve maximum power.

INPUT GAIN CONTROL

This control allows you to precisely adjust the input level of the signal arriving at the rear-panel input

connectors. At their fully counterclockwise position, the signal is attenuated by -80 dB. At their fully

clockwise position, the signal is no attenuated. When 0dBu of signal arrives at the input and the input level

controls are set to their fully clockwise position (0dBu), the Amplifier delivers full power.

Output terminal

Amplifiers output can run only one configuration at the same time. Operating amplifiers using 4 Ω

and 70 or 100 volt concurrently may cause damage to the amplifier or connected speakers.

Table of Contents