Output Terminal - AMC MMA 120X User Manual

Bracket installation manual
Before the mounting amplifier to the rack stand, please fix mounting
brackets to the amplifier by using two screws located in the sides of
amplifier.

Output terminal

Hi impedance output
Please note. Amplifiers output can run only one configuration at the same time. Operating amplifiers
using 4 Ω and 70 or 100 volt concurrently may cause damage to the amplifier or connected
speakers.
Remote MIC
MMA amplifier can be connected to remote paging microphone station Page station 5X by UTP
CAT5 cable. Please note : This port is not network terminal. Do not connect amplifier or
microphone to the to LAN. Maximum cable length 200m.
Low impedance output