Optional Parts; Lens Replacement; Pj Link Notice - Eiki LC-WXL200 Owner's Manual

The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. to the sales
dealer.
Standard Zoom Lens
Long Zoom Lens
Ultra Long Zoom Lens
Short Zoom Lens
Short Fixed Lens
SCART-VGA Cable
Pj-to NetDirector
The lens of this projector can be replaced with other optional lens. This feature enables you to use the projector for wide
variety of uses.
For installation and replacement of the lens, always contact the sales dealer. The projector lens must be installed or replaced
by well-trained sales or service engineers. Do not attempt to install and replace the lens by yourself as it may cause injury.
Do not hold the lens when carrying or lifting the projector. It may cause serious damage to the projector.
To the sales and service engineers:
For the lens replacement and lens installation, refer to the installation manual of the optional lens. Before replacing and
installing the lens, make sure that you are using the lens with the correct Type No.
This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information System
Industries Association). The projector supports all commands defined by PJLink Class 1 and is verified conformance with
PJLink Standard Class 1.
Projector Input
Input 1 RGB (PC analog)
RGB (Scart)
HDMI
Input 2 Video
Y, Pb/Cb,Pr/Cr
RGB
Input 3 Video
Y, Pb/Cb,Pr/Cr
S-video
Input 4 Network
PJLink is a registered trademark of JBMIA and pending trademark in some countries.
Optional Parts
Model No.
: AH-24741
: AH-24771
: AH-24781
: AH-24711
: AH-24721
: AH-98881
: PjNET-50
Lens Replacement
Pj Link Notice
PJLink Input
RGB 1
RGB 2
DIGITAL 3
VIDEO 1
VIDEO 2
RGB 3
VIDEO 3
VIDEO 4
VIDEO 5
NETWORK 1
Parameter
11
12
33
21
22
13
23
24
25
51
Appendix
5